Upgrade from SV to HDX

[Donald_Eccker]

shortly I’ll be up grading my SVs to HDXs. I was told you have to save your planes settings , EMS, and other data.
how do I go about doing that? Is there a Dynon link directing how to save these settings for the switch?
thanks in advance for your help.

 

[Rhino]

Upgrading from Original Skyview to HDX Skyview Question

I plan to update my original Skyview 10" Dispaly with a Skyview HDX 10" display. I want to make sure that all current settings/configuration is moved to the new HDX display. What do i need to do to make sure that I am able to get all the setting/configuration moved to the new HDX display...

forum.flydynon.com

Page 3-19 of the installation manual (revision AM).

 

[jnmeade]

I just did my two and found the instruction in the RV8JD post good. One comment. The instructions tell you to add your tail number, but it seems when you back up the settings that is done and you are never offered a screen to enter the tail number.

Next time, before I start I'm going to take a picture of my display showing all the widgets, their type, location and values. I'll also take a picture of the setup screen where this information is configured.

I'm going to take pictures of the EMS Setup screens that show the plug and pin connections by number to the function. Chapter 7 in the installation manual stuff.