Upgrading to EMS D-120. Will these work?

KNicholas2

I love flying!
Joined
Mar 6, 2012
Messages
27
When I built my RV9 more than 10 years ago, I built and installed a Rocky Mountain Instrument Micomonitor. It has worked well and served it's purpose but it is time to upgrade. Plus, the company no longer exists.

When I installed the MicroMonitor I used the following sensors. Will these work with the EMS D-120?

1. For ammeter I used a microswitch CSLA1CE current transducer.

2. Fuel flow - I installed Flowscan 201A/B

3. The manifold, fuel, oil pressure sensors etc. are all pretty standard and I am confident that they will work.

Any advice is appreciated.

Kim Nicholas
RV9
 

jakej

Well-Known Member
Joined
Oct 10, 2007
Messages
2,079
Location
Adelaide, Australia
1. Unsure as I've never seen one of these, try it out anyway - can't hurt.
2. Flowscan - no problem there.
3. Same as for 1.
 
Top