Using Skyview GPS as source for D10-A GPS in

[madb1rd]

Is it possible to use a parallel output from the SV-250, or one of the D1000 TX ports to supply the GPS source for a D10-A? I've stared at so many possible options for connecting all the parts I'm bringing together that I'm getting a little dizzy.

Thx,

W

 

[Dynon]

Yes - you can use a serial out ports from the SV-D1000, set to NMEA full.

 

[madb1rd]

Is it possible to directly use the TX data from the SV-250?

 

[jakej]

GPS 250 only works with Skyview systems & GPS 251 (discontinued) was for the legacy units. The baud rates are very different too.