version 14.2 upgrade using vans file

bigsteve

I love flying!
Joined
Oct 27, 2015
Messages
5
vans rv12 slsa version14.2 update won't load onto skyview even though it says operation successful  immediatly after i  hit yes to install.  Previously i have always used method 2 & dynon downloads with no problems.  Currently have version 11 on skyview & figured i would use vans files to do the official upgrade. Unzipped  the compressed files & loaded on usb drive, 10 files look ok , main file is 86615 vs skyview 86514.  when i have done updates in the past, lots of different screens come up & boot, so i know the skyview isn't loading, but display says operation successful as soon as i hit yes,  any ideas ? or should i try the dynon file and then do the other 9 vans  dfg files afterwords & hope that they are compatible ?
 

bigsteve

I love flying!
Joined
Oct 27, 2015
Messages
5
I uploaded the dynon file and it loaded fine.  I then loaded the vans version 14 and it compared and loaded in 30 sec vs the 5 or 10 minutes which makes sense.  I then loaded the 8 vans dfg files as well as transponder updates, everything worked fine.  Will fly tomorrow to see if everything is ok,  been missing my adsb since Jan.  Sky view is awesome piece of hardware !!!
 
Top