Wiring connections

[pgtuck]

Installing dual D1000 screens in my RV6. What is the preferred method to connect three wires. I.E. both Dynon to a sensor lead. Thanks in advance!

 

[jakej]

If it’s an EMS sensor then a simple low cost molex one should do. Mate-N-LOK Series, eg p/ n 1-480305-0.

 

[skysailor]

You do not want to attach both Dynon screens to a single sensor. All the sensors should go to a single EMS module. The EMS module will connect to both screens through the Dynon network connection.