Wiring Garmin GTN to skyview for ADS-b compliance

[johnsteichen]

I need a pin to pin description of the wiring required to connect my Garmin GTN 750 to Skyview for a certified GPS WAAS connection. I had it somewhere, and lost it and cannot find the schematic description anywhere. Anyone help.

 

[GalinHdz]

For ADS-B the TX serial data (ADSB+ format) from the GTN is connected via a 1.21K ohm resistor to pin 3 of the Dynon transponder. The rest is configuring both devices.

 

[Dynon]

The full connection details are in the SkyView System Installation Guide that you can download from http://docs.dynonavionics.com.