Latest activity

Right-O, Chris. Will do!

32 left. 33 right.

It should output whatever system voltage you put into it.

Thanks for posting, Bryant. I'm in the planning stages of my HDX install for my 182 and love seeing how others are getting it done...

I'm going to have Six Pack Aero replace the factory original control yokes with new ones from Cessna. The new Cessna yokes are a better...

If you are using the converters to go from capacitive to resistive then yes. But don’t do that. Ditch the converters and use the...

Anyone know what the voltage output of a TrimAmp will be to my trim motor if I have 24v input to the TrimAmp? Does the TrimAmp only...

Which pins does the installation manual say to use for tach input?

HI All, I am installing a gps175 with Skyview, I would like to know if someone is using IFR SID/STAR/APPROACH European and Italian...

No. See the installation manual.

I'm connecting a T1A9-1 UMA magnetic pickup installed on a Slick magneto to my Dynon system. Which EMS pin would I use for the signal...

Do I have to declare capacitance plates as resistor senders in EMS configuration, and not capacitance, as I use dynon converters?

I'm going to have Six Pack Aero replace the factory original control yokes with new ones from Cessna. The new Cessna yokes are a better...

Thanks I will do this.

That is right EGT and CHT EMS harnesses are labelled