Latest activity

Can’t give you a definitive answer on the 650, but the HDX does send frequencies from the Info page to my GTR200B.

Thanks for the replies. The sensor is mounted on the firewall in the standard position for the RV-10. I‘ll check it for air, but still...

Is the sensor located on the engine or on the firewall? If on the engine itself, you can be seeing the result of a poor engine ground to...

Suggest checking the sensor for a slight leak. Dynon put out a service bulletin in 2020 about potential leaks in Kavlico pressure...

I just had this issue develop on my Skyview Touch and reached out to Dynon for assistance. Their immediate response was to send the...

Just be careful...it sounds like you fixed it, but maybe didn't really figure out root cause, so the fix might only be temporary. Fly...

Six Pack Aero is making progress with wiring up some of the components for the new panel. It’s a work in progress…

Update; Tried every suggestion, so far no cause, no remedy. Sent Diagnostic File to Dynon, three weeks ago - no response. So much for...

I think I have two here somewhere in the hangar that have been removed during HDX upgrades. Where are you located?

Could be air in the oil pressure line to the sensor. This might cause the rising oil pressure to compress the air in the line and spike...

I have a D120 with Kavlico sensor for oil pressure. Occasionally I notice on start the oil pressure spikes rapidly as the starter is...

Just saw the announcement that Dynon has acquired Trig. Perhaps now Dynon will finally offer some version of the Trig TX56 or TX57 NAV...

Hello, Yesterday morning I completed a 1.5 hour flight with no issues with my Dynon setup. In the afternoon, with no changes to the...

I think my magnetometer has given up the ghost. Anyone have one for sale? How do we go about getting a replacement? I cant find them...

I think I have it fixed. After answering that I had two feeds fused at 5 amps each, I went back and checked. I realized I had one 5 amp...