Latest activity

On the left of the Dynon tray is the SV-ADSB-472. That's a Radiorax mount system. Not sure about the connector.

Full disclosure: I lack the training, skill sets, and experience to answer your avionics/electrical questions. It's probably best that...

One the mounting tray, I see the EMS, ADAHRS, ARINC modules stacked. On the left I’m assuming the ADSB IN module? Great idea with a...

Yes non US. Actually South Africa and here we buy the Once off Africa Aviation and Africa data base.

Great progress to report on interfacing the Dynon SkyView HDX, the Avidyne, IFD440, the PS Engineering PMA8000G, and one Dynon control...

He's non-US.

On the ground, Try isolating the source of the problem by taping over the static ports and see if the problem stops when engine is...

The 914 shows the MAP being taken from the Connector tube, which is pretty ittybitty. I then have to run it to the Dynon MAP Sensor...

Just test flew a Glasair 1RG with a Dynon classic. After boot up the airspeed shows 0 knots. As soon as I started the engine at 700...

Is it selected as a MAP LAYER in MAP CONTROLS? It won't display otherwise.

What are you seeing for amperage when this occurs? Check all your cables. Make sure they are well seated. Pins 1 & 2 on your EMS...

Begin with your schematic... and checking that connectors are secure and tight to your EMS module, I assume an SV-EMS-220. Bus voltage...

Scope this cool project out... an airplane quilt! The backside has minkie on it, so it's incredibly soft and warm. This quilt pattern...

Scope this cool project out... an airplane quilt! The backside has minkie on it, so it's incredibly soft and warm. This quilt pattern...

Now using HDX with SV-EMS