Latest activity

Is the Jepp data on a USB? If so, try reseating it after the SV has booted up.

I sent you a DM with my location info. Thanks!

I would suspect either the wiring or the sensor. In particular check the earth connection to the engine block is not corroded or loose...

After 750 hrs and a HDX up grade two yrs ago my Tach has started jumping all over. Some times a little sometimes allot. RV10 slick mags...

Full disclosure: I lack the training, skill sets, and experience to answer your avionics/electrical questions. It's probably best that...

On the left of the Dynon tray is the SV-ADSB-472. That's a Radiorax mount system. Not sure about the connector.

Thank you for the feedback about the various components, for that is appreciated. 👍

On the left of the Dynon tray is the SV-ADSB-472. That's a Radiorax mount system. Not sure about the connector.

Full disclosure: I lack the training, skill sets, and experience to answer your avionics/electrical questions. It's probably best that...

One the mounting tray, I see the EMS, ADAHRS, ARINC modules stacked. On the left I’m assuming the ADSB IN module? Great idea with a...

Yes non US. Actually South Africa and here we buy the Once off Africa Aviation and Africa data base.

Great progress to report on interfacing the Dynon SkyView HDX, the Avidyne, IFD440, the PS Engineering PMA8000G, and one Dynon control...

He's non-US.

On the ground, Try isolating the source of the problem by taping over the static ports and see if the problem stops when engine is...

The 914 shows the MAP being taken from the Connector tube, which is pretty ittybitty. I then have to run it to the Dynon MAP Sensor...