Latest activity

Is there a way to change the background color to black using the HDX as the ND. Sometimes the terrain information is distracting and...

That's why I said I assumed the PMA8000 was your common ground point, because PS Engineering asks for that. Your power grounds can be...

I’m not clear on that because Note 4 in the PMA manual says “all shields should be grounded at the audio panel only. Other end remains...

Audio is good. Grounding doesn't look right. You should have a common grounding point for all your audio grounds in your aircraft...

Is this pinout correct for connecting the T-25 to the comm input on the PMA 8000? The shield wire on the PMA 8000 side only goes to...

I deserved that. I did find it in the manual. Thanks.

This sounds right. Did a short 25-min flight today. 2nd display didn’t work. Then, after sitting 2 hours, both displays lit right up at...

The PM1000II doesn't have all the bells and whistles the MGL intercom has. It doesn't have stereo, Bluetooth or a cockpit voice...

I'd check wiring and connector pins first. Bad connections can go in and out with vibrations and variations of temperature.

I did have a look at the MGL audio panel. It has all the bells and whistles which I don't want and don't need. That's why I'm looking...

Get a PS Engineering audio panel. An intercom is no substitute for a real audio panel.

Recently, I made a 3 leg flight from San Diego to Bozeman. I have 2 HDX displays in my 182. Upon the first startup, the primary screen...

Maybe not, depending on what you want. You could use a mixer to allow additional headsets to hear the intercom, and possibly to talk on...

I’ve been using the Dynon intercom for a couple of years now and really like its simplicity and low panel foot print. As I’m presently...

Thankyou Rhino. This started recently ,some months after update. I shall read your posted attachment to reacquaint myself with grounding...