Latest activity

What HSI Source is set on the Skyview?

First off - probably user error. I have a Dual Skyview HDX setup, with a Trig 56A Nav/Com and an Avidyne IFD440 GPS/Nav/Com. First off...

You might try temporarily removing the AP panel from the circuit by simply wiring around it directly to the hat switches, one at a time...

Hi, I have a skyview system connected via serial interface to my GNC 255. I believe that the skyview sends GPS data continuously to...

One other item of which to be aware: A very popular stick grip these days is the Infinity grip. They have several button positions on...

Dynon Tech Support did their magic. Yellow wires from servos thru switch to ground does it. Also, thanks to those above for directing...

I have both a quick disconnect switch (just like addressed in the Manual), very easy to do especially if you already have an unused...

It is a single contact (push to make contact) switch grounding the control line to the servo's (with an additional 5k resistor over the...

It is a single contact (push to make contact) switch grounding the control line to the servo's (with an additional 5k resistor over the...

I would like to have an AP disconnect switch on my stick. But, I can't find anything in the literature on how to wire it. Can I just...

Have you recently brought any new gadgets into the airplane? Cigarette lighter style plug-in USB power supplies and rechargeable USB...

There must have been an outage. I flew last week and the airport category was displayed on the weather layer.

Thanks! Thank you!

Gotcha. I’ll make sure all audio grounds go to the PMA. Thanks for your help.

For listen only (backseat pax), just connect the pax headphone phone jacks in parallel with the copilot or pilot phone outputs from the...