Latest activity

What you are seeing is normal. The carb gets the heat from the oil pan

What you are seeing is normal. The carb gets the heat from the oil pan

Did you set your connected sensor up as type 3 on the GP contact you connected it to? The GRT sensor has different resistance values...

I have read several posts that identify the Dynon supplied oil temp sensor as a problem. I have a Skyview Touch and my oil temp has...

dual GA two plug.

Sorry, mine that went bad were the charging ports for a phone or tablet. I had one in the panel for the wife’s phone, and one behind...

Thanks. Is there a separate module for the Skyview HDX? My HDX has only USB-A ports on the back panel. My plan was to get a...

Yes… I had two of the old USB-A modules in my plane, both of them went bad. By going bad they were creating a fault on my ACM with an...

The OP has a history of not understanding basic concepts and troubleshooting / resolutions available and presented to him (ie fuel flow...

Has anyone replaced the Dynon stock USBA to USBA panel mount cable with a USBA to USBC panel mount cable? There are a number of these...

The OP has a history of not understanding basic concepts and troubleshooting / resolutions available and presented to him (ie fuel flow...

Interesting morning read (while looking for something else). Early in the thread, I suspected as did others the problem was outside of...

Graham PM me Steve

Because Dynon, and other properly designed pitot tubes have drain holes specifically for this reason.

You should send this directly to Dynon. They don't continually monitor the forums, and I somewhat doubt they check every post. I...