Latest activity

The resistors are for use on the ‘legacy’ (eg D120/180) units & not used on the SV series. Like GKC said - recheck your sensor...

It is an Aeromomentum engine.

Hello, I am selling a second-hand F6 with the latest version of the software and the associated ADS-B TRX 1090 receiver, as well as the...

Unfortunately it never successfully gets through the compass calibration or at least not with the correct heading. Over the weekend I...

You didn't mention what engine you are installing to (Rotax, Lycoming, etc) I've not seen any mention of a resistor on those wires for...

Copy flight plan from navigator to Dynon

Quite a few forum threads and articles have at various times addressed ground loops, and their potential to cause noise or other...

I am setting up an HDX system and have Kavlico 150 psi Pressure sensors (P/N 103757-000) for both oil and fuel. With my engine not...

You mention that you get a message at each bootup that a compass calibration is required. This presumably means that something is going...

Unfortunately it never successfully gets through the compass calibration or at least not with the correct heading. Over the weekend I...

For backseat displays: https://www.huvver.tech/huvver-avi-download-version-8/ These devices were designed to take SkyView data (either...

I only have two things to add. 1. since I fly a tandem seater RV-8 I would love to have a display output to just duplicate my screen...

You mention that you get a message at each bootup that a compass calibration is required. This presumably means that something is going...

For backseat displays: https://www.huvver.tech/huvver-avi-download-version-8/ These devices were designed to take SkyView data (either...

For backseat displays: https://www.huvver.tech/huvver-avi-download-version-8/ These devices were designed to take SkyView data (either...