Latest activity

What's new New posts New profile posts Latest activity
  • S
    SkippyDiesel replied to the thread Aoa failure.
    "Definitely no blockage ...." Are you sure ?- use compressed air (with care) to blow clear. ".....no leaks." Again - Are you sure? If...
  • C
    CanardMulti replied to the thread Fuel Calibration.
    One item NOT in the manual: be patient. Give the voltage numbers on the screen plenty of time to settle down completely before saving...
  • Rhino
    Rhino replied to the thread Using EMS input 23 ( General Input Type C) for detection of Fuel Pump Running.
    Unless your voltage can spike over 30 volts, and I don't see how it could, it shouldn't be needed. It's rated to handle spikes that...
  • R
    RV7Builder posted the thread Using EMS input 23 ( General Input Type C) for detection of Fuel Pump Running in Installing SkyView.
    Hi, i woul like to have an indicator in my HDX when the fuel pump is switched on. For this i have a free signal input on my EMS. PIn 23...
  • J
    jakej reacted to ryschneider's post in the thread Compass 180 deg off with Like Like.
    Update, found the problem: After removing the empennage fairing and cross-referencing my January 2019 build log photos with the Dynon SV...
  • B
    benapilot replied to the thread Fuel Calibration.
    Good stuff! I temporarily installed the HDX today and started the fuel calibration process to get a look at what I’ll need. On my 39.5...
  • G
    greentips replied to the thread Fuel Calibration.
    Good points. I did not deflate the nose wheel or strut. I did level the airplane r/l and set the fuel selector to the opposite tank to...
  • Rhino
    Rhino reacted to ryschneider's post in the thread Compass 180 deg off with Like Like.
    Update, found the problem: After removing the empennage fairing and cross-referencing my January 2019 build log photos with the Dynon SV...
  • R
    r2brou2 replied to the thread Fuel Calibration.
    I think you tell it the max fuel quantity and it tells you how many gallons to put in with the last one saying fill the rest of the way...
  • J
    jmiller007 posted the thread Garmin Aera 660 / AP74 / D180 in D10/D100 Series Discussion.
    After fixing some wiring issues that had my autopilot down, things work great when I set altitude and heading from the AP74. Here's my...
  • GKC Aviation
    GKC Aviation reacted to ryschneider's post in the thread Compass 180 deg off with Like Like.
    Update, found the problem: After removing the empennage fairing and cross-referencing my January 2019 build log photos with the Dynon SV...
  • G
    greentips replied to the thread Fuel Calibration.
    I have the old stewart-warner style resistive gauges. I followed the dynon procedure for that. I think the calibration for those...
  • R
    ryschneider replied to the thread Compass 180 deg off.
    Update, found the problem: After removing the empennage fairing and cross-referencing my January 2019 build log photos with the Dynon SV...
  • I
    ingolf posted the thread Nano 4 in good condition in Classifieds.
    I sell a Nano 4 recorder in good condition, with its case and charger (see photos). Negotiable price, shipping included: €699...
    • 249690_cleanup.jpg
    • 249691_cleanup.jpg
    • 249692_cleanup.jpg
    • 249693_cleanup.jpg
  • T
    tbbaily replied to the thread D180 and d100.
    The 180 is setup as the master on the dsab netwtk. It’s worked for 8 years and just lately hasn’t worked. I don’t if the 100 orc180 is bad
Show older items
Top