Latest activity

The EMS is not happy with signals that exceed 5V. Here is what I did...

Hi thanks, that looks great.

I just put my magnetometer out in my 182 wingtip with Quasar lights. I should be calibrating in the next couple weeks and will report...

Hey all! I'm doing an install in a 180 with Quasar Tips and Aero LEDs. Do you see any issues with running the Remote Magnetometer to the...

I'm installing a Skyview HDX with an Apollo SL30 and a certified Garmin WAAS GPS. Is it my understanding that the Skyview will derive...

Thanks Rhino. Since I didn't build the plane or assemble the panel, I didn't know that pitot installation document existed. I'm not sure...

"Definitely no blockage ...." Are you sure ?- use compressed air (with care) to blow clear. ".....no leaks." Again - Are you sure? If...

The GP inputs are on-off only. They don't have the ability to verify a circuit status beyond on-off. The EMS already monitors heated...

I would like to know how to build a Skyview widget to show the status of my pitot heat circuit, similar to your fuel boost pump icon...

I use to have a small LED on the panel that would illuminate when my boost pump was on. It was on the periphery of my vision and was...

You don't use TRK You will want to be in NAV

The EMS is not happy with signals that exceed 5V. Here is what I did...

Hi thank You very, much ! I need a Digital Value "Pump ON" when i have 12 V on the Pump Power source., so i think Pin23 should be fine...

Personally, if it’s a nylon fitting like you are using, I would not use anything as the soft nylon should fill the gaps and provide a...

Lon - To answer your question - no, you cannot offset the Dynon as you described. I recently calibrated my ADAHRS unit and used the...