EFIS-D10A Install Guide Typo?

Dave H.

New Member
Joined
Apr 27, 2020
Messages
10
Is it just me or are the "A"s and "B"s mixed up here?

EFIS-D10A Installation Guide revision J from August 2010 page 6-5:

===============================================
AP74 ELECTRICAL INSTALLATION
When installing the AP74, we recommend building enough slack wiring into the D25 connector to allow the AP74 to be removed from its tray with the connector attached.
Use the D-sub pins/connector kit included with your AP74 to make the following connections:
Pin 3: Dynon Smart Avionics Bus (DSAB) “A”, connected in parallel with all other DSAB B connections (Blue wire on Dynon-supplied wiring harnesses)
Pin 4: Power, 10 - 30 volts DC
Pin 16: Dynon Smart Avionics Bus (DSAB) “B”, connected in parallel with all other DSAB A connections (Green wire on Dynon-supplied wiring harnesses)
================================================

Thanks
Dave
 
Last edited:

Dynon

Dynon Staff
Staff member
Joined
Jan 14, 2013
Messages
14,217
Location
Woodinville, WA
Hmmph, how about that. I'd thought we'd totally debugged that manual by now. You're right: All "A"s go together, as to all "B"s.
 
Top