Recent content by dzubot

Did a short 15 min flight today, weather isn't great so had to stick low and short 500-1000ft, flight aware shows good flight track now, not in a different country finally. PAPR test didn't result in anything, my guess is the flight was too short and too low, report says not enough data...

I can confirm I was flying during these recordings that show me in all sorts of different countries. My transponder was set to hex code of 12345. So maybe this is what was causing the issue? Flight ID shouldn’t matter as far what I can tell from reading the manual but can try setting that to...

I installed the 2020 gps, and did a flight with it today, other aircraft reported seeing me fine on their ads-b in. Half way through the flight I was looking at my transponder settings and realized didn't have the hex code set, so I looked it up and entered the code. After the flight I checked...

On a second note my ads-b status indicates no signal in the menu. I recently did the latest firmware update. But do not know if it was like this before updating. Thoughts?

I’m surprised Dynon would not implement something or support the tailbeaconx to give us an option. Dynon why do you not support the tailbeacon until you guys come out with a hardware solution? I would think that would be easiest solution for now.

Hi all, I use a pipistrel for survey work in Canada and regularly fly at 14,000ft, I have the dynon skyview with mode - s and ads-b in/out with 2020 compliant gps. Does anyone know if this meets the space based requirement set in Canada? On may 16, 2024 aircraft must have a space based ads-b...

I have same issues happening in Canada after recently updating my skyview touch. Now ads-b says partial. Was flying yesterday and a guy with ads-b said I was flickering on his display coming on and off. Flight aware track is also showing me all over the place where used to have nice track. As I...

I have now ordered a new intercom, will swap it out and see if the sound goes away. The sound is there when nothing else but the radio and intercom are on. Will report on my findings.

I guess I thought it was a given that I have the Dynon intercom if I'm posting it here in the Dynon forum. It's the SV-Intercom 2S.

So recently I've noticed a very annoying sound coming through my headset, it sounds kind of like tee tee tee tee tee tee, over and over again. I've eliminated the engine, and all other avionics by pulling breakers on the ground, as soon as I pull the intercom breaker the sound is gone, with...

Shoot I would have bought it. I have two 10” touch in my aircraft. One is on occasion having boot issues. I tried removing one and connecting d9 cable to the other but can’t get adhar or ems to work if one is removed. Was going to send for repair. Anyone out there try connecting an HDX and...

Dynon any potential chance hdmi can be supported in the future? I’d love to use my second skyview display for use with my computer when im flying mapping missions instead of having a separate third display in my tiny pipistrel.

I am going to try this. I have my doubts it will work as the camera already going from USB-c to display port, then. I’d be going from display port to HDMI to s video. That’s a lot of conversions but I will try it and write back on here if it works.

I’d like to request support to plug in digital video inputs to view on the dynon SkyView. I currently use the USB to component/s-video adapter to display video from a FLIR ir camera for survey work. The company is upgrading the Flir camera to one now with DisplayPort video out. I’m unable to...

See the attached pic of my friends garmin, it has capability of overlaying an external video source on the main screen. This would be very handy for taxiing, instead of the video taking up the entire screen and not being able to see engine instruments or other vital info. Is this something you...