Search results

Hello, Yesterday morning I completed a 1.5 hour flight with no issues with my Dynon setup. In the afternoon, with no changes to the airplane or avionics, my HDX1100 failed to boot. My normal process is to boot up off the backup battery, start the engine and then turn on the Avionics master...

Sorry you are having this issue. It is a stretch, but have you tried reducing the data log collection rate? The data log should roll over when it gets to a certain size. Just a guess based on it happening every other flight. My next concern would be possible overheating? Jim

It is probably be a stretch, but does the same thing happen with and without the backup battery connected? Do single presses of buttons 2 and 5 reliably respond to being pressed such as Direct (2) and Flight plan (5)? Looks like there is any outside chance this thread may be related to your...

I received a System Event error, I can remember the number, when my HDX DSub connectors were not completely screwed in and secure.

Thank you for the suggestion and I hope that Dynon delivers. After 5 years and almost 800 flights, my hdx1100 buttons 7 and 8 are becoming more challenging to register, even hard presses, the required time to get to the Clear Log submenu. I clear logs before the start of a flight and only...

I edited my post. My question was if he is testing with an external power supply (unlikely)

It is a long shot, but have you tried changing the receive frequency? I had a 2018 model T25 that had static and showed the receive light on for certain frequencies. Dynon replaced the radio with an updated model (still labelled as a T25) that works great. You indicated the problem occurs with...

But if you happen to be using the harness based USB connection, it will no longer work with the Version 2 HDX (all new hdx displays being shipped have a few new internal hardware components).

I believe the only option is to press hold the right (map) knob once you have landed. Assumes you have a Seatle avionics or airmate subscription, airport diagrams downloaded to a usb drive, and the USB drive connected to your skyview.

I'm sorry to see this as a permanent decision. Do you support a USB connection splitter? I'm installing V2 hardware dual Hdx1100 and the back usb ports will be overused with dynon WiFi, Seattle av maps on a thumb drive, and a dynon usb video adapter. My plan was to build my own D37 harnesses...

Hello, Any forum members happen to have experience installing dynon auto-pilot servos in a Bushby Mustang II by adapting an available dynon kit? Thanks, Jim

I am very happy with using FlyQ as a moving map, ads-b in traffic and weather using the hdx wifi information. The ability to have an iPad as an HDX screen content duplicator would be very interesting!!

Are all users experiencing this issue have software version 16.3.2 installed? I have not problems with wifi using a D1000 and 16.2.4 (I'm NOT saying that 16.2.4 is a fix)

Sorry to hear about your upgrade issue. I believe there is a way to back level the system. Dynon support periodically monitors this forum, but I would suggest sending this information to support@dynonavionics.com Good luck, I hope your issue is resolved quickly

Hi, Do you have a USB drive connected/inserted in the SkyView? If so, please consider trying to power it on without the USB connected. Since the screen eventually does boot up, it is unlikely the issue, but some higher capacity USB drives cause the boot up process to fail.

Ugh... it is finally really fixed!! The Options connector on the av5000 had pins 3 and 4 swapped. "Options" Pin 3 should be white with a green stripe. Pin 4 white with blue stripe. Dynon network status reports happy happy.

Don Jones from Dynon quickly responded to my support email with the above information. He had worked with another rv-12 builder to find a faulty wire. Unfortunately, my issue appears different. Update: I reach perfect continuity of the roll servo in the "options" av5000 connector while the...

I just ran the update and was able to get the new VFR information updated on my USB in about 8 minutes. There are a number of things I did that seem to have improved the update performance: (Prior to all of this, my update times were multiple hours) -I cleaned up my USB drive by deleting...

Thank you for the reply. My write up was wrong (i will correct it)

(See bottom of this original post for my fix) Hello, I am assisting the builder of an ELSA RV-12 to diagnose an issue with his roll auto-pilot servo generating " Skyview network connection fault Data 2 pair (Pins 4 & 8) " -Dynon D1000 screen version 16.0.4.8437 installed -SV32 servo (serial...