Search results

Thanks, Don! This patch also corrected the problem of the data logger not having a GPS time value. RV-12 16.0.4 (Experiment Amateur Built)

I use this camera for an inside the cockpit, fuel level status in my Sonex (semi-transparent tank). I also use the Dynon video adapter. 400 hours, the setup as worked great. If you choose this camera, be careful not to cut out the molded Y that appears to have no purpose. In an effort to...

Increase the touch area for the barometer current setting so the adjustment wheel updates the baro setting, sometimes the last use of the wheel is altitude. I don't find the wheel push to set focus as handy as using the touch screen.

Hi, If your radio is connected to a skyview, try changing the skyview contrast setting and see if the radio changes. There is a specific pin in the wiring to integrate the contrast. Jim

CRW- I'm impressed "I don’t use all of the data but it only takes a few minutes more for the download." Are you referring to the PC download or the transfer to the USB? My USB update process is roughly 90 minutes with only three states of VFR only information- very painful. I thought it was...

Just wanted to say that my chart update on my hdx1100 worked without issue. Do you see the map file as an update file or is the update option disabled?

Hi, The radio panel head has two network ports. They can be used for inbound or network extension. Jim

Hi, If your only network items are the 1000, ems, radio, and adahrs. The transponder, 472, and gps are comm ports/pins, not network connections. I have this system with an hdx1100, all my network ports are taken, but I don't need anything more. Hdx to radio and adahrs, ems to radio.

Same thing for me. I suspect the chart expiration algorithm is not anticipating leap year.

Sorry, I'm missing something. How do I configure this type setting? "For oil temperature, you want type 2. For coolant, it's type 3." In the sensor mapping, I set the ems220 pin 7, the 100409-001 sensor type, and the name. I don't see any additional settings? I'm using an Hdx1100 version 15.4.7

I has issues with my first dynon gps2020 inability to gain a lock at startup. There seemed to be a weak link to solar warming of the antenna helped to gain a lock. Lock time was 20 seconds to 20 minutes. After a few email exchanges and no answers, I had a great call with dynon support to...

All of the ems information is available for download via a usb. The data is formatted in simple csv that is compatible with excel. System, download user data logs.

64GB, exFAT, SA formatted, SA maps via SA tool=> cannot boot Skyview with USB inserted, maps are functional if I insert USB after boot up. 64GB, exFAT, NOT SA formatted, SA maps copied=> Skyview boots with no issues with USB inserted, drive can be used for data logs, SA maps not detected by...

I purchased a 64 GB SanDisk USB drive for data log storage and Seattle Avionics maps. After selecting the 'Prepare USB flash drive for Dynon Skyview' in the ChartData Manager my skyview HDX1100 will not boot. The initial HDX image will appear and stay there for about 90 seconds, the screen...

I tried a few different grounding techniques to see if I had a ground issue. No change in behavior- my temperature is still low. It is possible that I have a lot of forced air hitting the top of the probe, but I'm skeptical.

I addressed this by manufacturing a mount for the stock USB port in the wiring harness. I significantly reduced the length of the cable. It was a simple job, the only interesting part was understanding that the bare ground wire had a bit of heat shield on it- it looked like normal wire shield...

Thank you XPRSAV8R for this tip. It is working excellent!!!!

Hi, I have three 100409-000 fluid temperature probes. Each one has a different fluid to measure. Two appear to be consistently showing a lower than expected temperature. What should I expect if the sensor is going bad? Erratic, low, high, no reading? This is a single lead probe that does not...

Thank you

Hi, Is there a way to include the Dynon GPS-2020 GPS altitude on the HDX1100 primary flight display? I see the GPS altitude in the data logger information. It would be nice to be able to use the GPS altitude as a cross check on the indicated altitude while in flight.