Search results

In my opinion, this move towards remote avionics is not welcomed.  It turns out that it's more difficult to mount a remote box on a tray than to have a conventional panel mount device as long as there is enough depth behind the panel.  Access to a remote tray is often very difficult unless...

I'm looking to install a D700 for the GIB. In addition to the SVN and power connections, are there any other required connections? For example, will the GPS info be transmitted on the SVN to the 'slave' EFIS, or do I need to hook these wires up as well? V

Here's a convenient place that has summary of the Dynon Air Data and Engine Data streams.  It should be immune to the clerical errors in byte numbering from Dynon's documentation because it was generated using a spreadsheet. These data stream summaries were generated by an interoperability...

Hey Chris, send me some pics. My HR-II is ready for an engine soon. V

Question about the Audio outputs. The SV systems have stereo outputs.  Is this intended at some point in the future as an entertainment function, or always as an alarm/warning function? The difference is that the entertainment function should be wired to a mutuable input on an intercom, but...

Or, you could use one of these: This was designed specifically for use in SkyView networks to replace a tree of splitters and centralize the wiring. Thanks, Vern Little www.vx-aviation.com

One more thing... I'd like to request some additional features on this. Please send me a p.m. so I can share it privately. Thanks, Vern

Thanks, I'd appreciate early access to your new format so that appropriate modifications/testing can be done to our device well in advance. For example, if you are extending your sentence length, but leaving the current information in its present position, then we will not have to make any...

I'd like to confirm that streaming air data (D10A compatible) will be one of the serial port output options on the SV systems. Our V-Speed ADS (Glareshield AoA indicator) has seen a sudden surge in popularity now that pilots find AoA a "must have".  It would be nice for the SV to drive it...

Due to popular demand, much arm twisting and feelings of guilt, our remote AoA indicator is back in production. The V-Speed ADS has more than 5 years flight experience in numerous aircraft, and is supported by both Dynon and GRT Avionics. MGL is also considering support. The V-Speed ADS is a...

The boards won't have enclosures. This reduces size, weight and cost (especially cost). If mounted in an exposed location, you may fabricate an aluminum shroud if you wish, but most installations will be well protected behind an instrument panel. If you want fully enclosed versions, you can...

And to add insult to injury, we have just release two other wiring hubs in addition to the AXIS-9A (above) and the AXIS-15A (RS-232 thread). They are the AXIS-25A and GBX-25A.  The AXIS-25A is a 25-wire, five connector hub, while the GBX-25A is a 25-wire ground (or power) distribution block.  ...

Information on the Wiring Hub is now available on www.vx-aviation.com. Product is now available. Thanks, Vern

This is a heads up to list members on a new product we are just introducing:  a five channel SVN wiring hub. Earlier this year, we intro'd a wiring hub for managing the RS-232 and related signals from Dynon SkyView EFIS systems (called the AXIS-15A).  See the thread...

Good news from Vx Aviation on AXIS-15A Available. The AXIS-15A EFIS Wiring Hub has been released as a product. See www.vx-aviation.com or www.vx-aviation.com/documents/AXIS-15A-110101.pdf for more information. Thanks for all of the feedback on this site and in the private emails sent to me...

I'd recommend contacting Monroy for info on their product. As I mentioned, the serial output documentation is not yet complete. It does track multiple targets on the built-in display. Vern

It's OK, you can't hurt anything by wiring it up the way Dynon recommends. V

There is some discussion on serial ports http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1290017431 My recommendation is to prewire everything in anticipation of future upgrades (new instruments). If you don't use a wiring hub like the one I've developed, just connect the wires and leave...

One of Jose Monroy's best kep secrets is the new ATD-300+ which provides directional capability with a new, streamlined external mount antenna. I have flight tested it, and it appears to function properly. He also indicated that the speaker output pin will be rededicated to a serial data...

And here's a photo of the prototype: Thanks, Vern