Search results

I'd very much like to have AOA on an HUD. Are there any HUD applications planned?

I'm looking at a ream :) of paper documentation for various Dynon products, some of which I will use for frequent reference, some will be used once (hopefully) and then stored and most of which may be superseded. What have you found to be successful in physically handling and managing the...

I have a SkyView that I bought in 2011, upgraded recently, and am just now getting ready to install. I bought an additional SkyView just recently. Can I use the current or modern installation instructions for both or do I need to use the right manual for each?

Is there reference information available that gives information on the electrical and RF frequency characteristics of carbon fiber as used in aircraft such as the Flight Design? My question has to do with VHF and HF comm frequencies, transponders, grounds and so forth. If Dynon has some...

I added 17.5 gallons of fuel to my CTSW and found that I had 25.5 gallons by sticking the tanks. I decided to correct the fuel level remaining by taking the tank to full and reducing it by 8.5 gallons. Whenever I did that, I ended up with a very large negative number. Can one select Full and...

Not sure where to put this inquiry. I check the box to be notified of replies to threads but get no notification that I can see. How does one use this feature?

My Dynon 120 indicates voltage at full throttle of 13.3-13.4 volts. A DVM reading at the cigaret ligher shows 13.8=13.9 volts. How do I change the Dynon to read the correct voltage?

Is there a description of how Dynon measures volts and amps on the Rotax 912ULS? I'm trying to understand what information is displayed, where it's gotten, how it's processed, etc. EMS D120

Is there a way to export the configuration settings of the 120? And if there is a way, is there a way to reload the configuration so one doesn't have to reenter every item in every screen?

912 ULS in FDCTSW @120 TT. Recently, R CHT has been showing readings 20-30 deg lower than normal, then it started showing very low readings, sometimes 0. Then the left CHT started doing it as well. EGT, oil temp and all other indications are it's not an engine problem but something in the...