Search results

  1. J

    Servo fail on power-up, cleared by power cycle

    Steve A thought - it may be useful to connect a DMM to observe the volts while the power up is happening too. Jake J
  2. J

    Amp meter goes off scale when radio is keyed

    Don Composite & static electricity come to mind here ;) Also, did you do a SWR check on you antenna ? Pm me if you want - I may be able to give some info of use to you. Jake J Glasair IIS Avionics installer & without any RF energy issues with now fitted dual Dynon systems
  3. J

    Wiring Auto Disconnect Switch

    DS Jeff is now up to speed on this ;) Jake J
  4. J

    Wiring Auto Disconnect Switch

    Jeff Check your pm. Jake J
  5. J

    Version 11.1 upgrade fail on second screen

    John I have sent a pm to you. ;) Jake J
  6. J

    Frequency pass through from Aera or GPSMap

    Waiting for the good news , Merry Xmas. ;D Jake J
  7. J

    Version 11.1 upgrade fail on second screen

    John My method is to power off 1 x screen & do the other with all other Dynon products powered up then do the same for #2 followed by a Network Configuration (with ALL the systems turned on), you can leave the backup battery disconnected for this too if you want. Pm me if you want & I'll call...
  8. J

    AP74 Lights up

    You need the ap74 on to do the update,everything should then work ok after that. Jake J
  9. J

    Navigation Page on Skyview

    As ETA is available on the map page I don't see a need for it elsewhere as I'd suggest you wouldn't have the flight plan page up in flight normally - maybe others will see it differently   :) Jake J
  10. J

    Skyview boot time

    Dave, I'd be deleting files you have on that thumb drive & reloading those you need. Your situation is not normal &, like Steve, I've never seen that either. Jake J
  11. J

    Another SV screen issue

    Hugh Finally, good to hear after our discussion on phone that you have determined where the issue appears to be. So to make a point - maybe the subject topic & tone could have been a bit more gentle :) Jake J
  12. J

    Another SV screen issue

    Hugh You have probably tried this & it's a simple check to eliminate one item - try the other screens battery with this unit, that will determine whether it's a bad battery ;) BTW - circuit breakers can cause 'issues' that a DMM won't find, just ask David Brown. Jake J
  13. J

    Another SV screen issue

    Hugh You have probably tried this & it's a simple check to eliminate one item - try the other screens battery with this unit, that will determine whether it's a bad battery ;) Jake J
  14. J

    RV 9A Dynon Pitch servo install

    It really doesn't matter which way you need to do it, just make sure you don't have a possible over centre situation at any stage of travel & you're good to go ;) Jake J
  15. J

    Another SV screen issue

    What type of breaker are you using ? Jake J
  16. J

    UMA 1B3 Oil Temp Probe

    Doug That's fantastic, you finally got it sorted. Now you can enjoy the SV's & flying without that issue 'bugging' you. ;D Jake J
  17. J

    Radio interfence

    DS As a data point - I have just flown 25 hrs with my dual SV's in our Glasair with no issues when transmitting from either radio. Finally, after installing so many Dynon systems on customers aircraft, I get to experience the joy of using Dynon glass ;D ;D8-) The glasairs have Com 1 antenna...
  18. J

    Error during Update

    Carl I've seen that too, if it ain't broke then don't fix it ;D Jake J
  19. J

    SkyView Battery Charging before first flight.

    rfinch There is no need for your kind of comment here, by all means disagree if you must but abuse of a fellow forumite is not a good look. I get frustrated too with people sometimes especially those who don't read install manuals before asking questions however abuse is not the way to go. ...
  20. J

    Frequency pass through from Aera or GPSMap

    Vern, Just wondering - did you try my suggestion of powering up the Dynons first ? Result of that ? Jake J
Top