Search results

Hey, thank you very much. I have tried this configurtaion already too. The only thing is i wired the connection to Serial port 2. Should work too normaly. I will try it again tomorrow. The only thing i can imagine ist that i did not make a reboot of the devices after changing the setup. I only...

Hi, Trying to connect the air traffic from air avionics I wonder which seriell Format the hdx expects. I have tried a lot of different configurations Baudrate is always on both parts the same. Tried from 4800 to 19200. Rx From air avionics to tx hdx, Tx from air avionics to Rx hdx double...

Thank you very much. Looking forward to have a great System in our New plane......

Hi, thank you very much for your fast response !! Yes it is the Air Traffic ATD system. it is exactly how you mentioned. In the air traffic documentation i did only find an output signal not specified as low or high, and by a request at a "air.avionics" the couldn´t give me an answer about high...

Trying to connect an air traffic System to the sky view hdx i wonder how to connect the Audio Signal correct. The air traffic System Has a Audio out Signal. Do I have to connect IT with the high or Low input of the non muting in of the hdx intercom? Or Do I have to installthe the the low signal...

Unfortunatly i cant`t upload the file to the forum beause no *.stl files are allowed here !?! If you are interested You can send me an email, and i will send you the file. Nice greetings David

Yes for sure. I will Do that and Post IT here in the forum. I still have to make some small changes

Hi, no not at all. If you are interested I could send you the stl file for a 3d printer.

Hello doing the installation I wonder if there exists a housing for the shunt. I Do not want to leave the Power lines open anywhere before the firewall. I made this as a first attempt

Hi, Thank you very much!! This is exactly what I was looking for and did not find somehow. This helps me a lot. Nice greetings david

Hi, yes i know that description. My question, was if i can connect a sensor without its own (5V) Power supply for example like the resistive fuel sensor. An using a Power source for that sensor with an included Pull Up Resistor.

Hello, i´m not pretty sure if it is posible to use the above pin for a flap position sensor (variable resistor) without an additoinal 12 V sensor supply. Is ist possible to use that Pin with an programmed pull up resistor to 12 V, and meassure the Voltage as a Flap Position Signal ? I made a...

Tahnks for Your fast answers. May be a good compromise would be Com and Com Panel on one fuse, and one separated for the Intercom. I guess the Com Panel has no function without the Com, although i could use the intercom for comunication with the Copilot, as You mentioned. Nice greetings David

Hi everybody, planning the installation of our Dynon System I wonder if it makes sense spending 3 circuit breakers (5A) for the communication system, or one would be enough. In my Opinion, if the SV Com is out of order , the Com Panel and Interocm is useless anyway ? What do You think about...