Search results

Yes. Bought from aircruft spruce beginning of 2014, we installed and first flown this plane December of 2016. We are now about 30 hours out of our 40 hours test flight and we check all systems only now. We do have some problems with the Radio as well. SV-com-C25. Serial number 02386. Can you...

It is skyview battery. We charged it over night. We installed and in flight we get from alternator about 13V, but still the backup battery won't sustain any voltage (only about 3-4v) ??

We installed a backup battery about 3 years after we bought the system. Battery - after charging it over night still can't hold any voltage. Is it because the battery is old ?

We hear fine each other (intercom wise). We fly and happy with the the system, accept of that issue. Will look into the wiring again this weekend and will let you know if anything changes. Thank you all.

We are using dynon intercom SV-intercom-2S dynon radio SV-com-C25, a single 10" screen. We believe the wiring was done correctly. Will double check. Is there anything else you suggest, in the meantime? Thanks

Found the way to listen to dual frequency. Long push of the frequency knob.. (a short push will switch between active and stby frequencies- not used to it yet..) :-[

Facing the same problem. The "clicking" noise is a real pain. Have this system in a kitfox super sport 7, and it really bothers. Have another plane Sierra P2002 where we have the icom 210, and the dual band doesn't come with the same "clicking". Is there a way to go go around that noise...

any one can let me know what do I do wrong? :-/

anyone can give me a hint what am I doing wrong? trying to hear my AoA and actually any other warning and could't set it up. Audio set up - volume is 100.. boot sound ON... all the rest is Voice... But still can't hear a thing  :'(.. what do I miss?  :-/ Thanks David

Thanks. Will update this weekend and will advice. By the way, is it possible to upload my own maps ? Or should I use only the maps provided through PVFR or fore flight ?

I have purchased the skyview about 2.5 years ago. Only now finished my kitfox project and installed the system. (Up and running) What is the best and fastest way to upgrade the software of the skyview (if needed)?