Search results

Bill, Any chance you have 10.0, 10.1, or 11.0? If so, there was a SW issue in these versions that blew fuses, but it only happened at very low input voltages like you describe.

Such a capability is not currently a feature of SkyView. SkyView optionally outputs a data stream including that data to one of its five RS-232 TX ports, but I doubt the GTN is equipped to "parse" the data in our format.

Did you try rebooting by pushing buttons 1+2+5? If if continues, please contact Dynon Avionics Technical Support - 425-402-0433 or email support AT dynonavionics DOT com.

It's hard to troubleshoot from your description. Any chance you can post a screen shot or email it to support at dynonavionics dot com?

Hi all, We have a probable fix for v14 customers reporting momentary "red X" pages, uncommanded autopilot disconnects, and spurious audio caution alerts. It also has the fix for the unresponsiveness that occurs on older non-touch displays we mentioned in the recent Service Bulletin. If you are...

Bruce: The GPS' RS-232 TX wire must (eventually) be connected to the EFIS-D10A Pin 22; make sure you have continuity between those two end points. The GPS and EFIS-D10A must have a common ground (for the data flow to work). For example, if you're operating the GPS on battery power, there's no...

We HOPE so  :) We did identify a bug in v14.0.x.xxxx prior to v14.0.6.3609 that caused SkyView displays to freeze, and fixed that bug in v14.0.6.3609. We'd like to hear reports from customers that had the screen freeze happen and have since loaded v14.0.6.3609. We've been in touch via email to...

Do you have an EFIS-D10, EFIS-D10A, or an EMS-D10?

The report you receive from the FAA is whether or not you are compliant with 91.227 (what will be required as of 2020). With an SV-GPS-250, you aren't... and cannot be... compliant with 91.227 as the SV-GPS-250 is not a high integrity GPS, as required by 91.227. See your SkyView system - SETUP...

By default this is on, but can be turned off in a flight plan by "toggle overfly" on a waypoint. So generically, you need to disable it, not enable it. You can see the path it will follow right on the map. You do need to be in flight since it needs ground speed to calculate that. You also need...

Suggest you test your SkyView display audio output to insure that it's wired and configured correctly. When you get into the AUDIO SETUP, the display is outputting a repeating "Dynon Avionics". If you don't hear that in your audio system, the SkyView display's audio output is not wired...

We did have this issue with RV-12s, and it was resolved with a firmware update. What version of firmware do you have installed on your SkyView system? If it's reasonably current (such as at least v13.0.3), then you have reasonably current firmware, and this is likely a hardware issue. Please...

SkyView should not draw more than 5A even when charging. Does it do the same thing when running off the backup battery only? Press Button #1 to start it up with no master power.

Hi RV12 owners, I can speak first hand that Dynon and Van's have proactively worked together getting the v14 and GPS-2020 out as fast as possible to the RV12 SLSA fleet. I can also first hand say it was our (Dynon's) Service Bulletin that put the program on hold. We sincerely regret the...

RTIO is "Real Time Input / Output". Basically a fast ("Realtime") communications channel inside SkyView.

Carl is correct - you can split the output from an SL30 to both a SkyView and an EFIS-D10A. As many other customers have discovered, Carl's "use a [SPDT] switch" method of selecting GPS or SL30 works. The caveat is that the EFIS-D10A (and EFIS-D100) weren't DESIGNED to work that way - but it...

In current versions of firmware, we don't SEND the EMS data over Wi-Fi. You'll be a bit frustrated trying to find it ;)

This request was submitted to our queue for consideration.

These are "weatherpack" connectors, sold by many companies. Just search online and you'll find all you need. http://www.weatherpack.com/