Search results

true, seen the diagram but my current installation has a 4-way spider, so I would need to modify the fuel lines adding the "restrictor", then adding a fuel line with the fuel flow sensor between the "restrictor" and the spider. Would the spider be the same one used today, with one output port...

Hi all, wouldn't it be easy to just install one single Floscan on either carburator, so after the fuel spider, and simple double in software the reading? This is the way the flow sender is mounted in my Pipistrel Virus with an 80HP 912UL, the Brauniger MFD takes care of doubling the flow so...

Methinks we're really talking about the same "Aviation" protocol that Dynon has already implemented in the new firmware. Browsing the forum I found this interesting posting by Simn Smith: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1152571982/56#56 with a fairly good description of the...

I find this quite amazing in 2006! No website? :o But Google is always a good buddy, and it allowed me to find some useful info at Aircraft Spruce: http://www.aircraftspruce.com/catalog/inpages/princefuelprobes.php Ciao, Luca

the SL30 install manual can be found here: http://www.garmin.com/manuals/SL30Nav_Comm_InstallationManual.pdf The serial messages are document in Appendix E, page 59 of the manual. Happy reading! Ciao, Luca

Any hint on what other GPS functions would be supported by listening to the NMEA stream? I would take that Zulu time would be a good candidate (with local timezone support in the firmware), I would hope that wind velocity can be derived by using GPS track and ground speed versus airspeed and...

I rest my case. While I agree on the cost of software development, it's because of the cost of hardware going down and software quality getting better that we can enjoy nice products like yours. And yet, software updates, while costly to debug and support, bring a lot of value to those...

Why would you need an external box, if one would choose to hook up a Garmin SL30 nav/com radio? Every single bit of information can be found on the RS-232 wire, and the remote HSI head (your EFIS in this case) can instruct the SL30 on the OBS and frequency to use. To me, that would be a (sorry...

gosh, it took you guys less than 24 hours to decide... ;D Thanks, hope the change will improve the situation with the spam messages. Bye, Luca

Hi Forum admins, I am starting to be bothered by all those spam messages that are coming from "guest" users. It used to be the only new threads were started by those jerks, but now they are replying to old threads adding their junk to an existing thread, confusing things even further. Would...