Search results

I'm getting ready to install my SV-XPNDR-261 along with my GNS-430W. My question is, do I need a different serial port coming from my GNS-430W going to the SV-XPNDR-261 separate from the 430W port going to the Skyview directly as a nav source. I believe you can have only one port coming from...

No, the out pins are for transmitting to the attached devices. On the other side of the module, there is a network port that SkyView uses to communicate to the ARINC devices, as I understand it.

Search for New SkyView Products at Oshkosh. There is a post about fifth from the end that has a pinout diagram link. This is what I am using for wiring the SV-ARINC-429 module.

On this same topic, is there isolation between the network ports on the display units? I have a system with two displays and two ADAHRS modules. Do I gain network redundancy if I wire one ADAHRS module to one set of network input connectors on the display units and the other ADAHRS unit to the...

With regard to the pinout diagram for the ARINC module, the diagram you provided has two pins marked ARINC TX A(24 and 25), two pins marked ARINC TX B(12 and 13), and no Serial Port Tx. This seems to be incorrect/incomplete. Can you update me on this?

I'm wiring a panel with a couple of SV's and a 430W now and am interested in the ARINC module as well. Any chance of getting a pinout on the DB-25 for this module?