Search results

I want to feed my IFLY 720 into my HS34 so the GPS course will be displayed on the D100 HSI.  It appears pin 3 (the picture below is from the IFLY website showing the IFLY pinouts) is the transmit pin from the IFLY.  Do I connect the IFLY pin 3 to the HS34 pin 1 on the HS34?  ( I have HS34 pins...

I have a continental 0-200A and I have a Dynon EMS D10 with the latest software version. My oil temperature fluctuates over a 20 degree span during cruise flight. All other engine indicators are normal and steady. I do not believe the oil temp is actually doing this. Any ideas of things to...

I was updating my D10 EMS and the screen went black during the update process and froze. Anything I can do?

I just installed a D10A and EDC-10A. when I powered up the unit, i gently tilted the EDC10A to simulate pitch and yaw. I got no pitch or yaw information displayed on the D10A, but the headings did change on the D10A when i moved the EDC10A. what could be wrong?

I am using an SL30 with the D100. I have a question: Should the VOR identifier stay visible on the D100 (indefinitely) or does it disappear after a certain amount of time?

The last few flights, my D120 has been showing voltage of anywhere from 14.5 to 15.5.  My amp meter has been reading 60 amps during idle, and oscillates from 0 to 25 amps during flight ( I should show about 5-6 amps during flight).  I have a microair transponder that also shows the same voltage...

Will a Tru Trak servo connected to an AP74 work?

My #4 CHT has started intermittently telling me "shock cooling" during all phases of flight, to include taxi after first startup. In cruise, my #4 CHT is within a few degrees of the other CHT's and it does not fluctuate more than 5 degrees or so. I still get intermittent "shock cooling"...

I just rewired my panel and re-hooked everything back up as it should be. I have a D120. I am now seeing my EGT #3 read -85 while the rest of the EGT's read 95 (that's the temperature in my hangar so those are about right). Prior to panel update, the EGTs all were reading properly. I...

I have an SL30 hooked to a D100.  I have the D100 serial once connection set as follows Input: SL30 Output: SL30 CMD Baud rate: 9600 I have the SL30 set as follow SL30:Indicator Head Type: Serial I had both the active and standby frequencies tuned to active VOR frequencies. Attached is a...

Someone is offering to sell me their D100 and D120 wiring harnesses that are 8 years old. They have never been used. Have there been any changes to the wiring harnesses in the past 8 years, or have there been no changes to them? Thanks

I have a D100 and a wiring harness I bought through aircraft spruce 3-4 years ago.  I just bought an SL30 and was hooking it to my D100. The wiring diagram says to connect the pin 22 from the D100 to the serial out pin on the SL30.  The pin 22 on the D100 has a splice in it just after it leaves...

Is the ADSB-470 module compatible with anything other than the Skyview?

I have a D100, D120, AP74, HS34, SL30, Val Nav 2000, Microair 760 Radio. I would also like to listen to music. I fly a 2 place airplane. Can the Dynon SV-Intercom-2S handle getting all that audio to my headset without using an audio panel? I cant tell from the wiring diagrams how many audio...

I have a Val Nav 2000 hooked straight into pin 22 on the D100.  It receives the VOR and the yellow pointer will point to the VOR.  I flew a LOC and ILS approach and they worked fine, except the green arrow was stuck pointing to 360 so I got reverse sensing (was flying the ILS 14 and LOC 14) but...

How do you rotate the CDI needle on the D100 when you do not have an HS34 installed?

I have a Bendix/King KN53 receiver with glideslope. The description for the KN53 is as follows: "....The KN-53 may also be used with an HSI (King's KCS-55A System, for example) with a remote KN-72 VOR/LOC Converter" My question is: Does the D100 require the KN72 converter be used with the KN53...

I have read the users manual, but I am still unclear.  I have a D100 with DSAB to D120, an HS 34.  I have one SL-30, Garmin 155XL and a Avmap Geopilot II Plus.  I have 3 questions: 1)with that arrangement of radios can I connect all 3 units to the HSI, and 2) in wiring the HSI, can I use the...

Will the GPS-155XL drive the CDI in the Dynon D100? I just want to ask this question before dropping several thousand on a unit that will not talk to my Dynon stuff. Thanks.

I have calibrated my D120 fuel gauge. I would like to tweak the numbers a little bit for a more accurate reading. I cant find where it tells me how to change those numbers in the manual, nor can I find those numbers in the D120 system. Can I change the calibration figures, and if so, how do I...