Search results

If you "touch" the files in Graphic Converter (an app for the Mac - google it), it will put a thumnail in the BMP so you can see it. If you touch it with Windows 7, it generally embeds that too. However, I use Graphic Converter on the mac to just convert to a PNG file. I wish that Dynon would...

Oh, yes, L-Com are terrible on shipping and horrible to deal with when they send the wrong 25 cent part!

Put a filter on the EMS connectors and this should help. I have one on each D connector, but the key was a filter on the DB25. There's another thread on this somewhere, but they are the L-COM filters. http://www.l-com.com/item.aspx?id=3139 Cheers, ..lance

Indeed, rivers would be handy.

I have this issue in my RV also. CHT/EGT's rise about 50-75 degrees on transmit. MAP goes up also. No other EMS sensors are affected. I moved a 9 pin filter over to the EMS skynet connector, but the issue was unaffected. My COM antenna coax is routed near my EGT/CHTS for a few inches (AND...

Yes indeed, they work fine. Cheers, ..lance

I have a jabiru 3300 in my zodiac. Originally it had a grand rapids EIS. I have the same EGT, CHT and flowscan as you, and the all work with the Dynon EMS D120 and SkyView EMS (that I now use). Cheers, ..lance

Re: Vision Microsystems Oil Pressure / Fuel Pressu Thanks for that info. Maybe pind 2 is ground then... I agree with you on the new sensors, but I think he wants to keep his old ones. For the price, they must be made of solid gold or something! Cheers, ..lance

Does anyone know the wiring specifics on the Vision Microsystems Pressure transducers? They appear to have a 4 wire connection. I have a friend that is looking at using these existing sensors with his new SkyView (which of course is expecting a single voltage). If anyone has any information...

Ed, That's a known issue, with a workaround. See here: http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1261397772 ..lance

Well, YES it will "rock your socks off". No doubt about it :-)

Not sure what we can say at this point.... Its like a G900X with a free airplane ;-) But, seriously it is way ahead of the first generation products and anything else I've seen that costs less than a mercedes. We will all just have to wait a little while for all of the great features to be...

Hi, Please find attached zip file with pictures of my Zodiac XL with Dynon servos installed. It works very well for me. I had a TruTrak roll servo before, so the Dynon servo dropped right in to the same bracket and arm. Pitch was a little more tricky, but once I found a good place it was...

I had the TruTrak Digitrack in my Zodiac. Popping out the servo and installing the Dynon one was a breeze (and less wires). Adding the Dynon pitch servo was easy too, since they can all use the same wires! Since the Dynon uses less wires, I didn't have to run any new wiring (even though I...

If the remote display app is written in VS2008, it won't natively run on Windows Mobile 6, although it would be pretty easy to convert. Part of the tricky part would be finding a Windows Mobile 6 Pocket PC with the right hardware to talk to the Dynon RS232. Most PocketPC's have USB...

what did you use on the gx65? Mapcom or movmap? ...or something else? do you know the OS software version of the GX65? Thanks ..lance

When you install it, you just wire a DB9 serial connector (which comes with the pre-wired harnesses from most places). Anytime you want to update it, you plug a laptop into the connector and update it. Simple. You *do not need* to remove the unit! ..lance

drill_and_buck, I have seen this message before on an SL30. It appeared to be that that NAV part of the unit (from the bigger connector on the back) had powered up, but the DB15 (COM connector) wasn't fully seated, and the SL30 realised that that COM board in the SL30 wasn't powered and...

I have a neighbour with a GX65 and D10A. It doesn't play nice with the D10A. No GPS is displayed on the HSI.

I just installed 3.0 on my neighbour's airplane.... 1) D10A 2) Apollo GX65 2) EFIS pin 22 3) MapCom or MovMap 4) Did your Dynon HSI work before the upgrade? It did work at some point - I think a very early 3.x beta was the only time it worked! (I'm a beta tester) 5) Does your Dynon HSI work...