Search results

OK. I exported a user waypoint file from the sky view and used this file to create the new file which then worked. It appears that the header line has an item that is specific to what the sky view wants to see. Don't have time to track this down. Next item is that the icons created by user...

Made all changes as directed and same problem that I cannot upload waypoints from a CSV file.    Screen says 0 points entered but does not give any error messages. Edited file attached.

OK, thanx.    Another minor issue Ive found is that the waypoints created in the ADD WAYPOINT feature on the sky view seems to have different fields and results in different on-screen results than the upload feature. Some differences I noted is that the waypoint symbols are very large on...

Same problem. File attached.

Great thread.   Im getting the same issue with the ball left of centre with A/C and attitude indicator level.     Any luck with shimming to correct problem?    Im assuming that the ball is more sensitive than the attitude indicator - i.e. ball would indicate off centre before attitude...

I am not getting any voltage readings for either my RAC trim or flap position potentiometers.    Zero voltage both in the calibration wizard and on the sensor trouble shooting screens. Voltage supply 5VDC from pin 18 white/red to RAC white/orange Trim RAC white/blue to EMS ground pin 5 black...

Re: Skyview GPS module The skyview GPSmodule is not detected during configuration and an "position fail" message appears on EFIS screen.   Aircraft is currently in tent shelter and not able to move outside. Is the error due to the fact that the GPS cannot "see" satellites? If yes, is there...

Hi there. Luv the new skyview system! Appreciate if you could provide additional clarification on the best location for the ADAHRS. The specs recommend mounting away from magnetic interference. Seems like behind the baggage compartment in small planes is the most popular location but...