Search results

In my Dynon also, I have the PocketFMS

Sorry 15.3.4.5287

Yes but is fixed now in the .54xx Version Thanks Daniel

Hi there is no update from the database after power up the system or hand input the frequency from the Trig radio on the top line. If I push the station from Dynon to the Trig radio the database will read the station. Dynon skyview 1000 Trig TY 96 Daniel Van’s RV12

Hello I had also problem with the dongle. I live the pigtail and put the dongle direct in the Skyview. No problems since. Daniel Van’s RV12 one Skyview, Flarm and Trig radio

Hi you unknown In the most Radio you have to rise the sidetone value to hear your self in the headphones From Daniel Flying RV12, Switzerland

Hello Yes the Battery was only 10.5 V, I changed, made the Test, it's OK, but the Battery is weak. It says 12.3 V charged wenn I start the Batterytest it's starts on 11.3 V and counting down Thank You Daniel Schmid

Hi Sins I have installed version 15.1 I have problem to start the Skyview on his backup battery. The picture is coming up, get dark then if you push button one the picture is come again. The problem is also if an USB stick is in. If I switch the master on the Skyview is starting normal, after...

Hi I updated to the lasted version before and there is only one ADAHRS mounted, but we had never problem with it. Daniel

Hi all I did the calibration in the last Fligth, because the wind showed over 90 knots. Then it showed the better value of 37 knots. In the next flight it turns 90deg off course. What happened to do that? Daniel flew in a Tarragon with dual Skyview 1000 touch/700

Hallo Christian Das Problem ist das garrecht 1500 empfängt auch nicht adsb Transpondersignale wie Mode S die als umlaufende Warnungen dargestellt werden können, sie sind nicht genau lokalisierbar außer die Höhe. Ich habe ein 2000 trx mit Display. ich empfehle ein butterfly Display zusätzlich...

Thanks I will try it Daniel

Hi Dynon If possible I would like to have a dynamic airspace 1000 ft above my actual position down to the ground. Because in Switzerland is the airspace very complex. Thanks Daniel RV12

Thank to implement :D Daniel RV12 traveleler back from France

Hi all How to select a second target in HSI like in pilots user guide figure 25. I have still both needle on the same position. If there a possibility to select the second to an airport or an virtual VOR to VOR. And give the distance to this point like HSI 1 Thanks Daniel RV12 traveleler

Hi there is an USB stick with wifi You can write over wifi in the stick http://www.maxell.com/airstash/support.html Rv12 Switzerland Daniel

Hi I got the same, Original usb-stick from dynon. If you save the log, after it is finished, then reboot the the system. Daniel rv12 Switzerland

Hi you can also use Setting flarm to connect the Garrecht trx 1500 or 2000 to skyvew Daniel

hi Support is this beta to reduce the trim up / down and always the caution yelling in my ears? i will try it on Friday Daniel rv-12 Switzerland

Thank you very much Daniel