Search results

.... But I don't have ADSB-Out installed! I just have a Skyview connected to a Trig TT22 Mode S Transponder. I received a certified mail from the Flight Standards Service notifying me that I have 45 days to correct the equipment. They mentioned that in case of non compliance after this delay my...

OK, I would have guessed and it's probably what the Savy people are doing: lots of work for an accidental Excel user!

Right Swatson999, it's a question for Savy and they answered they were working on the problem after having a look at my download files. My post here was just to find out how many people were impacted while I wait for the fix. I have an RPM drop at run-up that I need to investigate and I hate to...

First, I need to apologize for not specifying that the "Autoland for the poor man" is not intended at providing automatic landing for any other purpose than saving the life of passengers in a light, experimental aircraft in the case of incapacitated pilot with no back-up (which is also the...

For the last six years I have been a happy user of SavyAnalysis which transforms the raw data downloaded from the Skyview into readable graphs. Unfortunately recently changes were made to the software of the website which made it unusable for this function. I am told that they are working on the...

After reading about the Garmin Autoland, I get the feeling that the Autopilot of the Skyview could be tweaked to provide a kind of Autoland service with the following additional simple tasks for the non-pilot: - As we do not have Auto-throttle, the operator would have to move the throttle under...

My Nexus tablet can be connected to an USB plug via a mini USB cable (mini USB is on the tablet side, the other end is a regular USB connector). When plugged into the Skyview USB port it shows that the Tablet is charging. I have two questions: - How much Amps can I draw from the Skyview? - Can I...

Here is an easy first step Dynon could provide short of complex totally integrated Checklists: - Allow Skyview to upload plain text as files - Allow Skyview to display these files in a pop-up window on demand Here you have your checklists that are just copies of the paper versions you are...

Sorry, I should have posted this when I finally solved my problem. On advice from Dynon support, I checked if my servos were powered. Although they had been powered once, when I checked there was no power on the servo! Troubleshooting the path of power line, I found a connector (on the VANs...

My RV-12 has just been flying for 2 weeks and the AP has not been used yet. With Skyview 6 the servos were found, configured and tested by the Skyview software. On the next power-up however, I got Pitch error and Roll error displayed. On the Hardware set-up page the servos were marked "not...

In the Skyview System Installation Guide (p 3-13 Rev K) it is mentioned that a 4 Gigabyte USB flash drive is the recommended drive for the Firmware Updates. Has anyone tried a larger size? Will a 32 Gig drive work?