Search results

It has done this everytime I've attempted to engage AP. I'll check gmeter tomorrow.

Greetings, When I engage the autopilot in "ALT/TRK" simplified mode it initiates an increasing pitch down command until I disengage. (It does this in any mode I select. . . thoughts?) I have searched the forum and found a somewhat similar discussion involving the setting of the IAS bug. Not...

Hi all! During my pre-flight I noticed the ailerons were jammed. I trouble-shooted the system and found the Dynon servo to be locked. I removed the servo and it won't move. I did not force it past the amount needed for the shear pin. Thoughts?

Talked to Dynon. They informed me that if the AOA probe is capped this error will occur. I put a pin hole in the cap I had and it worked perfectly!

Sorry for the image size, doing this with my IPad. Note all configuration pages show good.

Just installed newest software update. The system worked perfectly for the last 20 hours. (Since hook up and first flight.)  Now when I turn on my screens the system boots up normally for several seconds then I get the following :

I'll look and let you know!

The last few days I've begun having a problem with my ADHARS not booting up. When I turn on my power and avionics swtches Skyview boots up normally, but the PFD shows a red X and a warning message of ADHARS Fail. When I shut down the avionics switch and the system begins its 30 second...

Wires have been verified, Serial port 5 does show GPS-250, but there is no TX or RX data being received.

Hi all! Not receiving any data from my GPS-250.   Dynons showing POS1 active, serial port 5 on both 7" but no TX/RX data being received.  Wires all checked for continuity.  No Map being drawn, and a big RED X with the words NO GPS SIGNAL. QUESTION:  Do you have to complete MAGNETIC CALIBRATION...

I am trying to determine if I can hook up my three axis trim system to a straight Skyview system, (WITHOUT an EMS box), in order to utilize the built in trim indicator displays. As always, thanks for your help!

Hello, I'm in the process of the final wiring of my Dynon Skyview.  I have a FC-10 fuel computer that has a host of functions.  The directions state the following: "(Data Transmit to GPS) Connect this wire to your Panel Mount GPS. Handheld GPS do not connect this wire. The associated GPS...