Search results

Thanks Dynon... I checked with my Avionics shop and conpared the harness documentation, they had the RS232 as pin 59 on the GNS430. The shop said it should read as pin 58. (Typo) I went into setup and it was set to chnl 1 (59)... I switched it to Chnl 2 - Aviation, which would coincide with...

I sent my RMA records to Support, Let me know what my next action should be... Thanks

I tried booting the skyview directly from the Backup Battery yesterday (Button 1).  The Dynon splash screen came on very dimly, faded out and then nothing, screen remained black and hung.  I unplugged the backup battery, and attempted to boot via aircraft power... Booted right up, with no...

Once the unit is hung in the boot sequence (Master Switch ON) Backup Battery attached... Then nothing solves the issue, you can cycle the master on and off, 1-2-5, or 1. The only thing that works is power down the aircraft (Master OFF) unplug the Backup Battery and then power the aircraft up...

OK... I think I know where I was going wrong. I was going into setup mode 7-8 buttons, thinking it would be there. After reading your post and comparing it to the manual, I see where I should be going... I am in Setup so much these days my figures go there by default... Thanks for help!!

I was not able to find the option to add the ETE (Next). Probably something I am not seeing. I will follow Map>Map Menu>info items tomorrow to see if I missed something. I don't remember seeing an "Info Items" menu option.

I had 10.0 installed, and the 1-2-5 does attempt to reboot the SV, but no slash screen, just black. I have tried to hold the 1 button to see if the SV powers up or down, nothing visible. unplug the backup battery, apply power and the system boots right up. I installed 10.1 today to see if...

Quick Question... I am flying within the 30 hour trial period. I want to include the ETE Next on the map, but I don't see the option to add it in the Map Setup.  I have tried to find the options to edit the map, on the ground and in flight but no luck.  Do I need to purchase full version before...

The 1-2-5 is always the first thing to try... it has no affect on the boot process of my SV. once it hangs on the boot (Black Screen) nothing but removing the BU Bat works...

I am also having a similar issue...  I have a single 10" SV.  I RMA'd my original and I was given a Reman as a replacement. I had trouble booting right out of the box.  I also thought it was a VP-X Pro issue, but had plenty of voltage.  The VP-X indicated "No EFIS Data" I could see on the VP-X...

Steve... I have the Dynon Convertors...

Yep... I understand, I am sticking it now. In the RV I can accurately stick to about 8 gallons per side. I took the time to mark my stick in 1 gal increments, so I have a real good idea above the 8 gallon mark. I have a fresh overhaul, so fuel flows are high... we calculated 12.1 gph at this...

I went through the fuel tank calibration steps and it seemed all was fine. But, after my first initial flights, and top offs... I continue to get Fuel mis-match pop-ups. The tanks read about half full with a "+12" indication. I selected the "Match" option within the pop-up message. My question...

I was able to capture the failures in a video this morning... Where would you like me to sent it? The ADHARS/EMS indicated failure after the system was powered on for about 12 minutes...

Yes... I will see what I can capture. Boot is normal, everything seems to be working fine. Then "Splat" everything goes offline. I thought it may be a low battery, but I ruled that out the other day. Main Battery showing 12.5v. It seemed to start when I installed version 7 about 6 months...

Happens standing still in the hanger... The Skyview has "NOT" went offline with the engine running and aircraft moving, at least yet. I have 2 engine runs, run-in, and full static rpm checks. with about .8 hrs on the engine at this time. Everything else in the aircraft (Electrically) is rock...

I am about 3 weeks away from getting my RV-7A inspected for flight.  I have (1) 10" Skyview, EMS, ADHARS, Xpndr.  They have been installed and tested for about a year now.  Just in the past 2 weeks during testing of the systems... I sometimes get 3 RED "X"s across all systems, ADHARS "X" / EMS...