Search results

  1. 6

    Another report of Inverted D100 display

    OK, will do. Thanks for the quick reply. - JC
  2. 6

    Another report of Inverted D100 display

    I have a D100 EFIS I've been flying in an RV9-A for about 6 years. The unit works well however it occasionally displays the artificial horizon upside down when first turned on, green on the top and blue on the bottom of the display. When this occurs, turning the unit off and back on does NOT...
  3. 6

    Using Mono headset with DYNON stereo intercom

    I plan to use the new DYNON stereo intercom in a one-place airplane. I plan to use stereo headsets but am wondering what would happen if a mono headset is used. The mono set would probably short one of the outputs to ground and I don't know if that would damage the intercom. I would prefer not...
  4. 6

    NAVSRC LOST

    I'm running 5.4 and continue to have this problem in my RV9A and D100. Normally it occurs about once every 30 minutes but last Monday on a XCountry return trip it stated loosing the GPS Nav source every 2 minutes, literally! I then reconfigured the GPS AvMap IV to send updates at 9600 baud...
  5. 6

    D-120 Amp floating

    Sounds to me like one of the two current sense wires going to the current shunt have been broken or disconnected, possibly an open fuse since each of these two wires should have a small 1 amp or so fuse inline close to the shunt. I would not think this is a ground problem since the current...
  6. 6

    New Feature Request: Propeller Redline Alarm

    There doesn''t seem to be a page 6-8 in the current EMS installation manual. Are you saying there IS a way to set an RMP audio alarm without modifying the engine redline value?
  7. 6

    New Feature Request: Propeller Redline Alarm

    It would be beneficial if the EMS could provide a seperate Propeller Redline / Alarm function. My engine / propeller combination has a redline of 2600 RPM on the propeller and 2700 RPM on the engine. I would like to comfigure the EMS to provide an alarm at 2600 RPM for the Propeller. Currently I...
Top