autopilot

Hello folks.... So, I am looking for info from Seneca pilots about the Autopilot. I'm flabbergasted that Dynon would bring a brand new Autopilot to the table for the Seneca, but only with 2-Axis I want to ditch my steam gauges and go glass, and love the idea of a Dynon Setup! Cost and...

This is a long shot, but here goes. This has probably been gone over before - I'm new here. I did do a search and found that the only mention of anything close was almost 10 years ago. I am the third owner of a Zenith Zodiac 601HDS project that was sitting in garages for over 2 decades and I am...

Yet another poor soul searching for an AP74, either orientation. I'm in Fort Myers. Have D-10A for my 601HDS.

Autopilot was working as normal in April. Began breaking in new cylinders yesterday and the AP is not showing up on the display nor working from the AP Hard Button Panel. Funny thing is I can look at the hardware in the menu settings and both servos show up. I can also go through the test...

I tried to install a brand new SV32 pitch servo into an RV-8, pre 2006 - not prepunched. I strictly followed all the Dynon product Information respecting the drawing but I jumped into a NO-GO situation. The elevator bellcrank bearing rivets are not cleared with the retention bolt of the servo as...

I have a the D10A kit installed (main unit, battery, GPS antenna, magnetometer, OAT probe) and I was wondering if it is possible to send GPS position (and possibly other parameters like heading and position of the heading bug) to an external autopilot. I have purchased the PortaPilot unit...

I realize the ”keep it close to the chest” policy makes this impossible to answer precisely for all the reason that have been previously discussed but I’d really like to know if the Piper PA-24 is even on the radar for A/P certification? The only viable option at the moment is Trio and based on...

I have an RV-12 with Rotax 912 ULS, Skyview Classic signed screen, 2 axis AP, and just installed the AP panel and Knob panel. I got the new AP 37 pin connected and plugged in to my master control module. When I finished, everything worked great! Knobs function properly, AP works and flies with...

Happy to add more info, but I tried paying pros to do this and it's come back... wrong. Currently running 7" display with EMS, ADAHRS, ADS-B, SV Com/Intercom, and SV remote Xpdr. Had my actual mechanic add 2 SV servos for a 2-axis autopilot and they worked fine, but pitch would porpoise no...

Hi everybody I have a question I have dynon hdx 10 with external auto pilot knob .. but when i use autopilot mode in simplified mode the external button “level” do nothing... anche i have to use the button on the glass. How Could i abilitate the buttons? Thanks

Hello, in my CTSW plane is EFIS-D100 installed, i want to upgrade it to autopilot, i can buy much cheaper brand new SV32 servos and AP panel, but i found that many people is using D100 or also newer SkyView devices with 3rd party autopilots like TruTrak. Why that? Do they perform better? Can...

For Certified types that can't yet install Dynon Autopilots, Is there a tactical advantage to being able to use the Flight Director display to assist in hand flying? I've never had an autopilot coupled to a flight director display. Is the autopilot functionality (including Flight Director)...

I will soon be updating my panel and was curious if the F33A will likely be included in the autopilot certification of the A36 this fall? Mike