I have 2X D10A, 1X GNS430 and 1X SL30
One D10A is used a EFIS and the other as HSI. The primary is the HSI and it is connected to the GNS430 via the analogic output. GPS and COM/NAV are connected via DSAB.
Questions:
- Is the clock of the SL30 is synchronised with the primary?
- Is it possible to connect the GNS430 to the second D10A in order to receive informations like the wind. If it is possible, how the D10 makes the difference between same informations arriving via DSAB?
- During firmware update do we have to disconnect the GPS or is it enough to switch it off?
One D10A is used a EFIS and the other as HSI. The primary is the HSI and it is connected to the GNS430 via the analogic output. GPS and COM/NAV are connected via DSAB.
Questions:
- Is the clock of the SL30 is synchronised with the primary?
- Is it possible to connect the GNS430 to the second D10A in order to receive informations like the wind. If it is possible, how the D10 makes the difference between same informations arriving via DSAB?
- During firmware update do we have to disconnect the GPS or is it enough to switch it off?