badia358
Member
Question/Help. I installed the SV-XPNDR-261 in my RV-6A. I have an original 10" Dynon Skyview Display. I am getting my GPS signal to the SV-XPNDR-261 from the Garmin GNS 430W. The Transponder menu shows compliance = YES. On my first flight I was told that other airplanes with ADS-B In were not able to see me. On my second flight, without making any changes, others with ADS-B In were now able to see me. I also contacted ATC and asked for a transponder check and we did flight following for about 30 minutes with no issues. A ADS-B performance report indicated that all was working well.
A week ago, I went flying and requested a ADS-B performance report and a received an email that there was no report for my tail number. This made me wonder if my ADS-B Out was working.
Question: I have noticed in some pictures that the SV-Display shows ADS-B OK (OK in Green) and it also shows ADS-B Status. I have not seen the ADS-B OK or Status on my display. Is there a setting for me to turn on the ADS-B OK or Status on my Display? This way I may be able to see if ADS-B Out is working.
Thank you...
A week ago, I went flying and requested a ADS-B performance report and a received an email that there was no report for my tail number. This made me wonder if my ADS-B Out was working.
Question: I have noticed in some pictures that the SV-Display shows ADS-B OK (OK in Green) and it also shows ADS-B Status. I have not seen the ADS-B OK or Status on my display. Is there a setting for me to turn on the ADS-B OK or Status on my Display? This way I may be able to see if ADS-B Out is working.
Thank you...