ADS-B out

Asso_X_Jewel

New Member
Joined
Oct 9, 2019
Messages
8
I have installed a Skyview Classic SV1000 (version 15.4.7) + SV-GPS250 + SV-XPNDR
What do I have to do for this configuration is able to send ADS-B output signal ?
Thank you !
 

Carl_Froehlich

Active Member
Joined
Aug 22, 2007
Messages
220
If you already have a WAAS GPS receiver (Garmin 430W, GTN-650, etc.) you can keep the 250 GPS receiver - use the WAAS GPS serial out to feed the transponder for ADS-B out. This is covered in the SkyView install manual.

Carl
 
Top