ADS-B out

[Asso_X_Jewel]

I have installed a Skyview Classic SV1000 (version 15.4.7) + SV-GPS250 + SV-XPNDR
What do I have to do for this configuration is able to send ADS-B output signal ?
Thank you !

 

[Raymo]

The GPS250 is not an approved ADS-B out source. You will need the GPS-2020.

 

[GalinHdz]

Also, make sure you have the SV-XPNDR-261 in order to use it for ADS-B out.

 

[Asso_X_Jewel]

Thank's for your reply !

 

[Carl_Froehlich]

If you already have a WAAS GPS receiver (Garmin 430W, GTN-650, etc.) you can keep the 250 GPS receiver - use the WAAS GPS serial out to feed the transponder for ADS-B out. This is covered in the SkyView install manual.

Carl