ADS-B Traffic on Skyview Map

Spunk

Spunk

New Member
Joined
Jul 9, 2019
Messages
26
Planning out some sparkly new avionics for my trusty stock 1965 Skylane. Does ADS-B traffic show on the Skyview moving map or do I need another device (iPad, navigator) to show it? If not, is this a feature Dynon has planned in the future? Thanks!
 
It is displayed on the map and optionally on the PFD via the SV-ADSB-472 ADS-B IN DUAL CHANNEL RECEIVER. The WiFi dongle will allow viewing of traffic and WX on compatible portable devices/apps.

www.aircraftspruce.com

Dynon Skyview SV-ADSB-472 ADS-B In Dual Channel Receiver | Aircraft Spruce ®

Dynon Skyview SV-ADSB-472 ADS-B In Dual Channel Receiver Subscription-free weather displayed on SkyView, including NEXRAD radar, METARs and TAFS. Airport weather data can be displayed for nearest airports or for a specific airport identifie
www.aircraftspruce.com www.aircraftspruce.com
 
I loaded my 1962 182E with two Dynon Skyviews and have about two months of flying it so far. I love it!!! It’s never been easier to see and avoid traffic it shows up on the map as well at the PFD in very useful ways. Finally I feel like I can fly with precision and not have to constantly adjust for lagging instruments.
 

Attachments

  • 44AC522A-1E10-4A67-8FD3-93617D1BAC86.jpeg
    44AC522A-1E10-4A67-8FD3-93617D1BAC86.jpeg
    4.7 MB · Views: 548
  • 4CD9118D-E024-4898-B02F-2DD423BFB3DE.jpeg
    4CD9118D-E024-4898-B02F-2DD423BFB3DE.jpeg
    2.7 MB · Views: 543
I have been flying for the past year plus a Dynon HDX plus the SV 472 and it has worked great. The last couple of flights I have had an issue where the ADS-B in has disconnected a few times in flight. It is normally not long but it is disconnecting and showing me no traffic where I know there is some. Has anyone else experienced this problem?
 
Raymo said:
Yes, I have, and others too. Was supposed to be fixed and/or improved in the latest firmware update. I haven't flown enough with the update to know for sure.
Click to expand...
Thanks for the feedback. I have flown a lot since the firmware update and this is a recent problem that only happened in the last couple of days...hope it is not a sign of something worse.
 
pacecapt said:
Thanks for the feedback. I have flown a lot since the firmware update and this is a recent problem that only happened in the last couple of days...hope it is not a sign of something worse.
Click to expand...
Were you in a radar service area? If not, you'd only pick up traffic that is transmitting plane to plane via 1090 and antenna placement might result in blocked signals.
 
Raymo said:
Were you in a radar service area? If not, you'd only pick up traffic that is transmitting plane to plane via 1090 and antenna placement might result in blocked signals.
Click to expand...
Definitely yes, I was in and under two overlapping class Charlie airspaces...the traffic was there one second and blank screen the next.
 
I have been experiencing the same issue. I have sent multiple data logs to Dynon with no resolution. The latest response from them has been that it is third party supplier of a part in the 470 that is the issue. I fly in some of the most congested air space in the US around Phoenix, AZ with the largest flight schools in the country. Dynon please address this issue...!
 
You must log in or register to reply here.
Back
Top