I am currently wiring my panel and saw that I have to run the audio out (green wire) into my intercom for AOA alerts. I bought a 10k variable resistor as per the manual to adjust the volume of the alarm. I have an XCOM 760. I assumed that I had to wire the D100 audio output to the "music in" wiring on the XCOM so I connected it all up and the alarm worked fine when tested but the problem is that once the ipod is connected the alarm stops working... unlpug the ipod and it works again. In the XCOM FAQ it says......
Q: Can I hook up multiple inputs into the music circuit ??
A: Yes it is possible to hook up several inputs into the music circuit, but each device must be protected with a 4700 ohm resistor.
Does anyone think that this could be the problem I am experiencing? Where exactly do you put this resistor? Any advice woud be appreciated.
Q: Can I hook up multiple inputs into the music circuit ??
A: Yes it is possible to hook up several inputs into the music circuit, but each device must be protected with a 4700 ohm resistor.
Does anyone think that this could be the problem I am experiencing? Where exactly do you put this resistor? Any advice woud be appreciated.