johndavies
New Member
- Joined
- Oct 24, 2008
- Messages
- 14
This seems a dumb question but the manual says you must be able to disconnect the SL-30 or GPS to do firmware updates - is this as simple as switching off the SL-30 and GPS whilst doing the update or are we looking at a complete physical disconnect? (I am installing a D-100/D-180/HS-34 setup with the serial update through a rotary switch and thinking of doing the optional parallel serial connections in case of HS-34 failure) I really do not want three more switches to physically disconnect the connected NAV equipment if I can just turn them off. Thanks, John