Rubi_Halberthal
I love flying!
- Joined
- Dec 14, 2011
- Messages
- 12
Hello Dynon Gurus -
Completed the installation of the SkyView in my twin engine AirCam. I have problems with displaying 2 RPM (left and right engines) as well as the fuel flow for both engines. The display will show only ONE rpm and ONE fuel flow.
The EMS SETUP>SENSOR INPUT MAPPING is as follows:
Pin#= C37 P32/34 Function=RPM Sensor=RPM Name= Tach 1
Pin#= C37 P33/35 Function=RPM Sensor=RPM Name= Tach 2
The EMS SETUP>SCREEN LAYOUT EDITOR (100%,50%,20% pages - all the same problem) -
When pushing SENSOR button I get in the window of available SENSOR only 1 Tach and only one Fuel Flow. Can't get the two RPM sensors (left engine/Right engine) displayed. Only the right RPM and right Fuel Flow will show.
What am I doing wromg, and how should I fix it?
Thanks - Rubi Halberthal
Completed the installation of the SkyView in my twin engine AirCam. I have problems with displaying 2 RPM (left and right engines) as well as the fuel flow for both engines. The display will show only ONE rpm and ONE fuel flow.
The EMS SETUP>SENSOR INPUT MAPPING is as follows:
Pin#= C37 P32/34 Function=RPM Sensor=RPM Name= Tach 1
Pin#= C37 P33/35 Function=RPM Sensor=RPM Name= Tach 2
The EMS SETUP>SCREEN LAYOUT EDITOR (100%,50%,20% pages - all the same problem) -
When pushing SENSOR button I get in the window of available SENSOR only 1 Tach and only one Fuel Flow. Can't get the two RPM sensors (left engine/Right engine) displayed. Only the right RPM and right Fuel Flow will show.
What am I doing wromg, and how should I fix it?
Thanks - Rubi Halberthal