Dynon radio not recognized

Gfeldman

New Member
Joined
Nov 29, 2020
Messages
3
So it was working initially when I purchased my plane. I changed the transponder settings because I thought it was malfunctioning. Now transponder is fine but dynon radio displays “no SV”. I need exact settings to restore radio to the system.
 

Tim Fitz

Member
Joined
Dec 25, 2019
Messages
62
See page 16-4 in the Install manual (On Dynon website, under product information). Briefly here is what should happen.

•Go to SETUP MENU > SYSTEMSETUP >
SKYVIEW NETWORK SETUP > CONFIGURE > (right click) >
DETECT (button).•The SV-COM-C25 will be listed as SV-COM-PANEL.•
FINISH (button) > EXIT (button)

Good luck.
 

jakej

Well-Known Member
Joined
Oct 10, 2007
Messages
2,079
Location
Adelaide, Australia
So it was working initially when I purchased my plane. I changed the transponder settings because I thought it was malfunctioning. Now transponder is fine but dynon radio displays “no SV”. I need exact settings to restore radio to the system.

Would have been more helpful if you included that in your first post.
 

Raymo

I love aviation!
Joined
Apr 25, 2016
Messages
1,043
Location
Richmond Hill, GA
Sounds like a network related issue. You'll have to ring out the wires if the network search doesn't find it.
 
Top