EGT/CHT widget too wide

[swatson999]

I mentioned this in passing in a different thread...on the 30% display for EMS data, the EGT/CHT widget has text that runs off the edges (i.e., the widget it too wide for that size page).

 

[skyview_user]

That's what I told Dynon in a PM. Let's hope for the next release.

 

[Raymo]

The 15.3.3 release has the following:

Changed: Engine page widget defaults were changed to force the New thinner gauges and arcs to be used. All Newly displayed widgets will have the thinner look. Customers with existing thicker widgets can change to the thinner style by removing and replacing each widget via the ems layout editor.

http://www.dynonavionics.com/skyview-software-updates.php

 

[swatson999]

The 15.3.3 release has the following:

Changed: Engine page widget defaults were changed to force the New thinner gauges and arcs to be used. All Newly displayed widgets will have the thinner look. Customers with existing thicker widgets can change to the thinner style by removing and replacing each widget via the ems layout editor.

http://www.dynonavionics.com/skyview-software-updates.php

Did that to no effect.

 

[Raymo]

See Reply #4 in your other thread from MMarien.

http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1538252041

 

[swatson999]

See Reply #4 in your other thread from MMarien.

http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1538252041

I saw that already. It's not really the right answer here, though, is it? To have customers hand-tweaking widget size defaults so that they fit in the alloted spaces without overrunning the edges?