F
Frank(Guest)
Guest
I note that Matronics sell a "return fuel controller" that takes the input from 2 floscan sensors and subtracts one reading from the other.
As the Matronics fuel meter also allows the connection of a single floscan sensor it is likely you could hook the output of the return controller in place of the single floscan as an input to the EMS d10, I.e hook the florward/return floscan elements to the return contoller and the output to the EMS
This is "just a thought" though so I'm sure its a case of proceed at your own risk
Frank
As the Matronics fuel meter also allows the connection of a single floscan sensor it is likely you could hook the output of the return controller in place of the single floscan as an input to the EMS d10, I.e hook the florward/return floscan elements to the return contoller and the output to the EMS
This is "just a thought" though so I'm sure its a case of proceed at your own risk
Frank