stevelindell
New Member
- Joined
- May 16, 2011
- Messages
- 26
Running Dynon 5.5 on my D100. Updated the Garmin 696 to system ver. 6.8. Headed off and no TIS from the GTX-330 and no nav feed to the auto pilot. There was a nice magenta line on the 696 but no feed to the AP. Landed and checked the 696 settings, confirmed as correct. I was able to restore the feed by switching the 696 menu option over to TIS only and then back to the normal GTX setting. This worked for the remainder of the flight but I had to do the same menu routine at every restart. Here is what Garmin updated with 6.8: "Update VHF-out serial data format to support the GTR 200 COM Radio". along with "General system improvements".
Any ideas?
Any ideas?