GARMIN AERA 660

[piunocera]

I purchased a new Aera 660 but couldn´t find the correct serial port and baud to connect to Skyview. Anybody can help me... :-/

 

[Raymo]

The Garmin documentation will tell you which wire is serial TX. Connect it to one of the 5 serial RX wires on the Dynon harness. The known devices and settings are at the following link.

http://wiki.dynonavionics.com/GPS_Serial_Compatibility_and_Configuration_Settings

 

[Dynon]

Within SkyView, you can connect to any of the available serial ports. In SkyView's serial port configuration you'll set it to Aera, and everything on the SkyView side will be set correctly. On the Aera side, if memory serves you're looking for the NMEA Out + TIS setting at 9600 baud. In the advanced NMEA setup, make sure data rates is net to normal.